TheeLadyG


OK, I redid my camera calibration (note: this process was working properly just a couple of weeks ago) and am getting the same kinds of issues. Are the images captured...

 This is how it cut.

1. I did click the 'apply' button for sure 2. I did not move the paper 3. I did this test before when I first installed the 10w laser to...

I decided to take video just to make sure I was doing everything correctly and got a different problem: camera capture would not respond. Here is the Video: https://youtu.be/LLdd0h4wqsw

After restarting the laser and Luban I was able to finish the fresh calibration and cut another test square. The paper was never touched. Video: https://youtu.be/HZh7-5eV4EU

Sorry for all the comments! But I got more information. I decided to try another experiment. I noticed that the square I cut seemed to be smaller than the one...

 Mine looks right to me. Also, The camera capture WAS working properly before. Better than it ever did before with the 1.6w laser. I used the camera capture to...

1. My firmware shows as Snapmaker2_V1.14.2_20220113 and says this is the latest version when prompted to look for an update. Is this correct? 2. I am waiting for a long...

Today I followed steps 2-6. My align image was extremely skewed:  I did the alignment via Luban but the process is extremely difficult and frustrating to do...