GSV3MiaC

The type Id reported bty zwave2mqtt is  271-4096-5377 (0x010f-0x1501-0x1000), but no I don't have a manual on paper, I believe it is online. Maybe at https://manuals.fibaro.com/content/manuals/en/FGWPG-121/FGWPG-121-EN-T-v1.0.pdf ⁣Rgds, Dave Storey​ On...

Which is why I stated the fw version, and referenced the advanced manual in the original post.. https://manuals.fibaro.com/document/fgwp-advanced-parameters/ Which definitely does not match what zwave2mqtt was showing me, and using....

My device is actually fgwpg, not b, but i guess that is just physical pin out. The config seems to have separate reporting intervals for power, and energy, on params...

No labels on Solis setup screen. See attched screenshot. This is Home Assistant running under docker on a Pi. Not latest version I admit, but still ... I need some...

Mine has been doing this for almost all the entities for several months now. I think it maybe relates to the 'asynch' changes in HA. The integration (and other too)...

So what other devices do you have plugged in near your rfxcom usb port, and how far to your 2.4ghz WiFi router? Seems interference is likely cause, assuming rfxcom has...

I think the issue is down at the usb port (usb2, 3?) hardware level, where there is some interference caused with rfxcom. Personally I am migrating a lot of zwave,...

As far as i know you can only tell rfxcom what port to use when you set it up. Depending on how you run ha, you may be able to...

This is an example of what I see. Nothing was changed by me (or tesla) during this period, but each update (at the 11 min polling interval?) seems to take...

Blocked in England too. Bmw may make good cars but they are cr&p at software and supporting their customers. Guess my next ev will be Chinese.