Devesh Patel

Yes, Thank you that now compiles and uploads to the Arduino UNO; however, when I run the processing files from openview_oximeter directory in pulse-master, the example data won't plot [any]...

I'm not using the Pulse from ProtoCentral. I have the following Max 30100  I connect all the wires as stated but there is no red led powering up. What...

I read the example sketch file(PPG Plot.ino), it make sense that it suppose to plot RED and IR PPG signal. I open the PPG Plot file, compile, and upload to...

Hey, We replaced our sensor with another MAX30100 and now it works, which is great! I found out that the SpO2 measurement still need some work. It is very inconsistent,...

@m-brantheim We bought 2 sensor and they both didn't work at all. We couldn't get a red led in the sensor to light up what-so-ever. So we thought the problem...

@pulse3 We followed the exact setup that is mention by the author. It's on the README.md file of this repo. If you know a little about Electrical Engineering then you...