Ken McGuire
Ken McGuire
This is the second part of audit of the u-blox initilazation command stream. More detail can be provided as required. Lets look at what happens with the M10 more closely....
I have not made any recommendations yet as to how to address these issues, I am still testing revised commands on the u-blox modules I have.
Yep, that's the plan, baring conflicts with RealLife(tm) and DayJob(tm) ;>))
I will monitor the GNSS modules operating current as well to see how the "power saving" modes work. To that end I have a Nordic Semi Power Profiler Kit 2...
@jp-bennett I'd like to see those references, there have been versions of u-Center in the past that have had issues with incorrect commands being formed. I try to use the...
@jp-bennett Do you have a t-beam with a Neo-6? I'd like to know what protocol version it is, The Neo-6 I have is 7.03 and I don't want to update...
Sounds good, I'm surprised that the newer t-beams with Neo-6 don't have newer firmware, The Neo-6 went EOL just recently, I actually thought it had gone EOL several years ago....
What was sent out to dist's and others on the u-blox mailing list. https://www.mouser.com/PCN/u-blox_u_blox6_Modules_EOL_UBX_23001070.pdf
and: https://content.u-blox.com/sites/default/files/NEO-6P-NEO-6V_EOL_%28UBX-20009315%29.pdf
I think, for the time being I'm not going to worry about the Neo-6s with protocol 14 firmware. From what I've seen of the t-beam construction, it would be a...