G0MJW

Congratulations, I had to give up on the Pi zero. When I did get it working on my PI4 I found it to be incredibly insensitive, which implies it was...

Thanks - I will give that a go later. I have been using a PI4 borrowed from another project but it is quite a lot of effort to use as...

I have it working, but it doesn't work with SoapyRemote so I am missing something. The server is running OK, could it be permissions?

I can transmit but still no luck with SoapyRemote.

Yes but it didn't work. It seems you have to install soapyremote manually and not from the repository. git clone https://github.com/pothosware/SoapyRemote.git cd SoapyRemote mkdir build cd build cmake .. make...

No build errors with Soapy-Server, it works now when run as root but it isn't working properly. The sensitivity is very low and so was the power except for the...

OK - I have found out why it is deaf. Hardware damaged in shipping. Looking in the plastic bag it came in I found a small core along with the...

I am also seeing this now I have fixed the broken hardware. I and Q are the same so everything is mirrored. I also lose many samples, this is on...

Swapping I and Q? A Let I = Q Let Q = I type error, which explains things. It would be good if this could be fixed quickly in Main....

> Hi there, also got my board, installed on a RPi3 running [archlinux ARM](https://archlinuxarm.org/platforms/armv8/broadcom/raspberry-pi-3) > > Compiled both `main` and `develop_R1` branches. Now on commit [d332593](https://github.com/cariboulabs/cariboulite/commit/d332593799c569dad17e14118ab3bf323a06b15e), `SoapySDRUtil --find` gives me...