Frostokus
Frostokus
I forgot to add that the rim zone does not work on all pads as if the parameter NO_RIM was enabled in the code. Pin 5 pull up 3.3V. I...
> The "DC OFFSET ERROR" in your screen shot indicates that something with your analog front end seems not to be correct. Can you please cross check the correct schematics?...
Good afternoon. Set Rs=100k, Rp=20k/20k, Cp=10nf (constant voltage at ADC input is also 1.65V) esp32 dev board began to respond adequately, rimshot appeared. esp32s3 - what is happening has not...