Francis663

I found that characters are missing in the Nextion display when the french language (fr) is selected. I had to install the Nextion editor to load the HMI file and...

Symptom: Hotend E0 PID is not working: Temperature reaches the target, stops heating and goes down until timeout. I searched in the source code and find that the PWM command...

Wrong pins on Megatronics board.

1

The file 703.h has an error: ORIG_HEATER_HE1_PIN 8 -> Must be 9 ORIG_HEATER_HE2_PIN 9 -> Must be 8 And just for fun: ORIG_BEEPER_PIN NoPin -> can be set to 61...