Francesco-Rugg
Francesco-Rugg
@rncbc , thank you now works, but when I write in terminal `qjackctl` I have `LibEGL warning: DIR2: failed to authenticate ` `qt5cy: using qt5ct plugin` `qt5ct: D-bus global menu:...
[mks_config.txt](https://github.com/makerbase-mks/MKS-TFT/files/5892933/mks_config.txt)
> It seems that everything is normal. After you update, has the name of mks_config.txt changed to ***.cur? yes
> If has change name to ***.cur, the config has loaded. Ok but the display when I turn on again the TFT screen turn to 0 position, not 180° One...
> @Francesco-Rugg > X-Y maximum travel set, you need you “$130” and "$131" command, you can refer to here:https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration >  I need to set up the TFT, not the...
> Ok but the display when I turn on again the TFT screen turn to 0 position, not 180° This problem is not resolved.
> Provide you config file and firmware to me and i will test it. @mks-viva 8 days ago you ask me for the CONFIG file and told me that the...
@danielminson I haven't tried yet, the problem is the same of 3 months ago?