Foxy6670

Sorry for the late response @78Alpha! I'll try that. Also, on my AMD RX 550, it outputs a black image. Not the case for my much slower GT 710, however.

Hate to revive an old thread, but this is STILL HAPPENING in FluidSynth 2.1.7.

To have the bot run in the background: Press F3 + P to set Minecraft to not pause on focus lost (you only need to do this once) Alt +...

Okay, thank you.

I have an idea: if prismarine blocks are detected in render distance, have the bot go to land and grab a bucket of milk. And if it does end up...

I'm baffled by this too. I get the exact same error. `Peri Base = fe000000 SDRAM c0000000` `RPi4 GPIO detected` The weirdest part I find is that, until data is...

I'd like to see this work, too. It would give my old CRT a use again. But I think you can do it using a combination of pipes, encoders, and...

> i may be completely bull sh*ting here but from what i know, its not the codec side thats the issue (or like you said, piping to output via encoders...

A similar project called minimodem (you can install it on a Linux system with `sudo apt install minimodem`) uses FSK to transmit data. It's not as customizable as this project,...

> There is an FSK mode available in a branch. It's been a little while but I don't ever got fully merged. It requires some special branch of liquid-dsp too...