FormerLurker

@PhilBaz, G90/G91 influences extruder should be checked for Marlin 2.0+. Can you attach both the modified and unmodified gcode (I read in your OP that you would attach these, but...

Interesting, will look into this asap, and thank you for checking that out!

Update: After an extensive review and no issues discovered with the arc welder gcode, I ran the results through the inverse processor and can clearly see the deviations! This appears...

Can you post the Source and welded gcode please? Also, huge advances in m G2/G3 interpolation have been introduced in recent marlin builds. If possible, definitely upgrade your firmware to...

@brunoosti, I didn't realize what repo this was in, doah! Can you post to the arcwelderlib repo issues or discussions instead? That would be the right place to investigate this...

Anything I can do to help?

> Then it can handle the "print after upload" by itself, similarly how it waits for the PrintTimeGenius plugin to do its processing. PrintTimeGenius uses the gcode analysis hook I...

Maybe I can just provide an api call? Something like /arcwelder/printAfterProcessing? Internally I would check the processing queue to see if the provided path is in there, and if it...

I've not tried it, but it should be fine. I need to see some gcode, but I can't see why it wouldn't.

@Bob90, good point. Again, without seeing how the gcode is arranged, it would be difficult to tell, but I do NOT ensure extrusion volume per mm of travel. It might...