Octolapse

Octolapse copied to clipboard

Timelapse for resin Printers using a Lightsensor on the Raspberry Pi

2

Hi so these guys made a timelapse addon that triggers the camera shutter when the UV light comes on in the printers, I was wondering if somethign similar can be...

kot0005

Request for Creality Slicer to be added to Slicer List

1

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: ___REPLACE_THIS__OCTOLAPSE_VERSION_GOES_HERE #### Version of OctoPrint OctoPrint Version: ___REPLACE_THIS__OCTOPRINT_VERSION_GOES_HERE #### When you ran into...

Giles-B

Octolapse: Snaphots before and after completed print

6

#### If this is a feature request describe it here Most of the time, I use the "Smart - compatibility" or "Smart - Snap to Print" Triggers. Unfortunately, they don't...

PaWi20

Installing in octo4a fails (compilation error)

9

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: fails to install "master.zip" on 2023-06-03 #### Version of OctoPrint OctoPrint Version: 1.9.0...

philipp

Cannot install Octolapse on Python 3.10.6

15

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version: 1.8.7 (via [paukstelis](https://github.com/paukstelis/octoprint_install) installation script) ####...

dl9sec

No Snapshots have been taken with the current camera

12

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version:1.5.2 #### When you ran into the...

macombweare

[Request] Anycubic Korba Neo Printer Profile

1

#### If this is a feature request describe it here There does not seem to be any Anycubic Kobra printer profiles available with the stock program. Being a newb, I...

DanPerovich

#### If this is a feature request describe it here Currently, a script receives several parameters such as the current snapshot number, the file name for the taken picture, etc....

francofusco

STOP-SNAPSHOTS in gcode but still moving nozzle to center

3

#### If this is a feature request describe it here N/A #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version: 1.8.1 #### When you ran into...

jacopomaroli

DSLR: snapshot delay is in milliseconds during cofiguration

3

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: 0.4.2 #### Version of OctoPrint OctoPrint Version: 1.8.7 #### When you ran into...

francofusco