ArcWelderPlugin
ArcWelderPlugin copied to clipboard
FormerLurker
A plugin for OctoPrint used to convert G0/G1 commands to G2/G3 commands. Reduce the size of your gcode files, and reduce number of gcodes per second sent to your printer.
Arc Welder doesn't appear to process arcs when spiral vase mode is used. For example, a simple cylinder printed in vase mode will produce arcs in the skirt and initial...
I'm running the default firmware on my Ender 7 and occasionally Arc-Welder is going over 64 characters. The [mod recommended ](https://github.com/OctoPrint/OctoPrint/issues/4589) limiting the length of the g-code through the Arc-Welder...
Hi! I'm reporting this with the hope it may help to improve ArcWelder, but I'm not expecting this issue to be solved for me. So, if it's not interesting or...
Per the documentation, the following information may be useful: Send: N127 `M115`*34 Recv: NAME. Malyan VER: 4.0 MODEL: M200 HW: HH02 Recv: CLK:EXT BUILD: Aug 10 2017 09:53:33 Recv: ok...
The past couple prints have failed with a "bpos x square" (and one time the _pos y square) error causing the print head to crash into the frame. The issue...
I have updated to OctoPrint v1.8.0 (RPi 4) and everything looks fine except now when I perform a software update check it fails for ArcWelder:  ``` 2022-05-18 06:49:06,867 -...
Knowing that Cura 5 has variable line width, how does that affect Arc Welder? Does it still work? Will it need an update to handle varying lines?
About tab explains: Marlin has an option called MM_PER_ARC_SEGMENT that defaults to 1mm this option has now been replaced with MIN_ARC_SEGMENT_MM and MAX_ARC_SEGMENT_MM. What is the associated feedback to set...
In Octoprint 1.5.1 (and 1.5.0) on Raspberry Pi I get the following error:  in the log I see: 2020-12-06 10:05:17,762 - octoprint.plugins.softwareupdate...
[Arc welder not installing.txt](https://github.com/FormerLurker/ArcWelderPlugin/files/8247868/Arc.welder.not.installing.txt) Dear All, I forgot my password of my Octoprint server and needed to do a full reinstall. I am using Octo4a on my old phone and...
Metadata
Owner
Metadata
A plugin for OctoPrint used to convert G0/G1 commands to G2/G3 commands. Reduce the size of your gcode files, and reduce number of gcodes per second sent to your printer.