FiusRa

Good day. Dear developer. I am unable to compile the project. I just don't understand how to do it. I have a progromator. But how to upload your file with...

and with the ST-LINK Utility it is possible to do the same as you have just written. that is, I can flash the bin file without arduino dino

ST-LINK Utility firmware has been spilled. the device otkolibrovals. Right now I will transfer the encoder to the pins. Thank you. You can try the overclocked firmware. )))) Thank you.

with the second firmware hung on set input to dc processing, on the first the encoder is disabled only by pressing. cut the tracks. soldered wires to 14 and 15.

the latest firmware is good. the encoder is working. What's with firmware at 128. Why did it hang. I'd like to check the speedy. thank you

the firmware is working. what is the maximum frequency it can display without spikes. I tried to blow a signal of 100 kHz. test. he shows ka 97-98 -102 that...

You tried to fix the frequency. which he reproduces without error. on these firmwares. I do not have a signal generator over 22 kHz. It's very interesting. capabilities of this...

horror translator. wrote one translated another. processor 103 has a maximum frequency. indications. frequency. and. what is the maximum frequency possible. see. on a 303. processor. it makes sense to...

I agree. transfer. google It's funny. I'll try it differently. manufacturer. declared. characteristics. 200 kHz. signal. maximum. in fact. maximum 100 kHz. shows ok. this is with the official firmware....

if you replace it with a more sensitive one from the ad8605 or mcp633 or mcp601 series. they are much better than tl084. in my case is tl082