Fierydwarf
Fierydwarf
 At this time, i had a laptop plugged in. The amps, im assuming should be about 2.1 and the PolledSmartEnergy was reading 0 In Zigbee2MQTT. Appologies, i...
I think ive formatted it correctly
Ive set the value to 100, as stated (the 'Get zigbee attribute" showed 0) Pushing 'Set zigbee attribute' to set it but the value is still incorrect. Pushing Get zigbee...
Thank you for this, but, i have no idea what to do with it. Can you point me in the direction of some instructions?
@dmulcahey Sorry, i missed the update. Ive trid ti tonight and no it didnt work. The values are still the same.The Class within Signature displays as "class": "Zigpy.device.Device" ``` {...
No luck. i think i need to delete the files, and zigby_quirks and start fresh. ``` { "node_descriptor": "NodeDescriptor(logical_type=, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=, mac_capability_flags=, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0,...
Progress! ```{ "node_descriptor": "NodeDescriptor(logical_type=, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=, mac_capability_flags=, manufacturer_code=4660, maximum_buffer_size=108, maximum_incoming_transfer_size=0, server_mask=11264, maximum_outgoing_transfer_size=0, descriptor_capability_field=, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)", "endpoints": { "1": { "profile_id":...
Progress! I deleted the ZHA quirks option in HA, deleted the files and folders and started fresh. Still may need a bit of tweaking but its much closer than it...
Following. Same issue using ZHA.
Appoligise for the slow reply. life. So the values are pretty much there, enought "there" for me. Thankyou!. Im not not able to add the entity to the Home Assistant...