F5OEO
Using Tcanim with a high framerate disturb transmission in RF mode. Seems to be a memory contention. Need to investigate. For now, workaround is to slow the framerate (2 fps).
As encoder is now on QP constant, algorithm to calculate QP is not precise enough at high bitrate : should go back to constant bitrate for high SR or rewrite...
add a menu for reception parameter instead og using rf tx parameters
Seems that patern doesn't work with RF mode. Need to see if with other output mode (IQ/DTX1) it is the same. Suspicious is a DMA stop because of grabbing display.
Add minimum amplitude modulation on I/Q and RF and use a RRC filter with upsample to implement a Nyquist filter Could use https://github.com/jgaeddert/liquid-dsp In practise SampleRate Max is about 1M...this...
Sometimes, DMA seems not stopping produce a "DMA Weird state". Need to investigate and rewrite it with OOK based class.
After running easystest and exit, "sh" is remaining on process. Is it an issue related to whiptail ? Need to investigate as on pizero, cpu consuming could make some artefacts...
- Correct tscalc in wbe pluto.php - Remove datv startup and launch only process according to "mode" setup - publish incoming bitrate (mqtt) - publish modulator status (underflow, overflow, waiting...
Remux option is not well displayed on on interface , even setting.txt is savec with the right parameter