Ette

The "Too much slippage detected during the unload" is simply the consequence of the Timer too close issue (no unload move is performed, so indeed it measures nothing). I need...

Hi, As discussed in the discord channel, I think this is totally doable. The only issue this can cause is during a clog. I'm afraid of filament grinding by the...

Indeed one will need the spacer, I'll add it to the repo.

Please include the ercf cfg files at the end of your printer.cfg, not at the beginning

Hi. Just to let you know I'm looking into it. Unfortunately this is a rather vague issue, as this klipper error can be caused by a plethora of different things.

After tinkering yesterday, I found that, for whatever reason, recent Klipper updates made the call of ERCF_UNLOAD right after another command crash the MCU (timer too close). There is no...

The fix is live since a few days. Let me know if the issue still pop back

I've found one source of MCU Timer too close, namely when calling _ERCF_SERVO_UP and _ERCF_SERVO_DOWN one after another from a python module command. I'll use this simple exemple to open...

The PR from @cmroche was just merged. Let me know how that went for you guys

We could indeed match both motors accels, that looks like the most logical option. Though the accel difference is not supposed to cause any issues. The "Timer too close" on...