Emilv2
Emilv2
> Hi, I'm still investigating and observed, in my opinion, something to improve. The state of the sensor is not only the solar power production but also the battery charge/discharge...
The actual production in kW is the state of the sensor. There are also sensors for the battery power (kW) and accumulated energy for the batteries and panels (kWh). I...
It should load automatically, I'm not sure what is going on with your install.
You could try that, but I think the issue lies somewhere else since pymodbus is already a dependency of huawei-solar which is in manifest.json
How do you connect to the inverter? Some of them (SUN2000 series I think) will only accept modbus connections when you are connected through the inverter WiFi access point.
You will need to set up a separate WiFi connection with the inverter WiFi access point to be able to connect with the modbus server.
Ok, seems like you are able to connect now, but reading the register fails. Do you happen to have anything else connected with the modbus server? It only supports one...
Is that the app that uses cloud connection, or the one that needs a connection with the inverter WiFi access point? The cloud one shouldn't be an issue, but the...
Are you sure you are connected correctly? I see the subnet has not changed. You're still on `192.168.86.0/8`. The inverter should have the address `192.168.200.1` (`200` could be something else)...
``` Update of sensor.sun2000_4ktl_m1 is taking over 10 seconds ``` This will be fixed once we can use async pymodbus, for now the component is just slow. For the other...