Emanuele
Emanuele
Thanks for the help! But my CS pin is 10 (PB2), the pin 4 (PD4) enable the current on the SD card By the way i'm using a [Seeeduino Stalker...
@per1234 thanks for the help but maybe you didn't understand my problem my CS pin is the pin 10 (PB2) i have another pin for turning on the SD card,...
What about something like this? ``` SD_EN = true # Setup the enable pin (Needed only on board where is hardwired) SD_EN_STATE = LOW # Set the state of the...
Yes this could be really usefull
please add this!
> First of all, why do you need to get the current zoom? To get the selected area you need coordinates only, they represent that area. I use the zoom...
Hi, Thanks for the quick reply. This was tested on an AMD Ryzen 9 3950X, the java process was started with 8GB of dedicated RAM It's hard to belive that...
I've tried but the problem persist
Instead of adding a relation type, why not add a new type called "link" for these cases, it would be the equivalent of a "record" type but with the assurance...
> I’m aware of the issue and am currently investigating the cause. In the meantime, I recommend using version 2.6.3 if the problem persists. This version uses GDScript for the...