Andrew Elwell
Andrew Elwell
It'd be useful if you could use the github releases (https://help.github.com/articles/about-releases/) to match the tagged versions shown in https://grafana.com/plugins/natel-discrete-panel/installation
Only publish (as retained message) when state changes. if inverter offline, say so. 24h typical cycle will be: offline->waiting->normal->waiting->offline with offline mapping roughly to sunrise/sunset (depending on min voltage from...
Makes it easier to use in other projects (home-assistant.io for example)
Hopefully this is a minor change to mqtt.h connect call - see upstream docs at https://pubsubclient.knolleary.net/api#connect to add in some extra parameters if (mqtt_client.connect(clientId.c_str(),myConfig.mqtt_username,myConfig.mqtt_password)) { Possibly look at the way...
### Environment * Camera: ZWO ASI224MC * OS: Bullseye / 6.1.21-v7+ * Allsky version: v2023.05.01 * Pi model: Raspberry Pi 2 Model B Rev 1.1, 1G RAM ### Bug Description...
My use case is I have a bunch of sensors that publish temperature (example) to sensors/inside/temperature sensors/outside/temperature sensors/thing1/temperature sensors/thing2/temperature which is easy to subscribe using syntax 'sensors/+/temperature', but then I'd...
trails over (max age) should be removed / invsible so we don't end up with a sea of red
we should use g_key_file and save the info into a config file aprsmap.conf suggestions: [general] callsign = passphrase = -1 lat = lon = zoom = ; use zoom rather...
use a standard rainbow colour depending on speed (if land based) or height (if airborne) [wishlist]
startup aprsmap, set preferences to 46,6,200 and OK /build/aprsmap ctx->state = 0 Filter Data Set We were: 55.000000-4.000000 We are: 46.0000006.000000 *\* Message: Sending filter: #filter r/55/-4/600 but using 46.0,6.0,200...