Elpablito
Elpablito
Hi Thank for the answer. It was clear I lost same pieces on the way I had to read again your README to find the lost pieces. Give me some...
Hi As you can see, I have finished the box and now I have to make the connections. A question raised with Mega and Ramps that is how to connect...
Hi As I said my CNC isat the moment working with arduino uno and CNC shield. Picking up a DRV8255 from UNO e installed on ramp I have no Vref,...
Hi Your suggestion was my first thinking because the voltage on pin enable is 5.08V so I measured a driver on Uno but the result is the same 5V. In...
Hi I send you a photo of the CNC I have done so you can understand me. This is my first job and I have a lot of thing that...
Hi I have connected some spare steppers so I solved all the question of my previous post It is just a matter of knowing which button you have to push....
Hi I wrote a .g-code file on an SD card formatted as suggested by you, but I am not able to read it. The system see an SD card, bat...
Hi I include a file test.nc made with freecad because I never saw such a kind of file so I am not sure if it is formally correct. After I...
Hi Solved I can go head. The problem is this comment (; G98) it stop GBRL, but not ask me why.
Hi Long time ago I said “ if you want to test something give it to someone who does not know how it works”. Tested Slot, Drill single hole and...