Elmar Jongerius

I'm using a FT2232H (And I'm two ports for I2C). This is my configuration for the lib. i2c_ext.configure((self.url + "/1"), clockstretching=True, frequency=1000.0) (Frequency is set really low now, to make...

It took some time, but I think that I do not agree with you analysis :) Especially at the point where you did find "FTDI HiZ+Slave down". To be able...

The issues I find are: 1. FT2232H pulls the SCL line high (sourcing current), instead of HiZ. 2. FT2232H does not wait for the SCL to be released by slave...

Hey you're great putting in soo much effort! I use an LPC824 as an I2C slave device which is giving me the problems, but there are more devices which use...

Ok, I had a quick test with the diode, but that did not work. Even the lower bitrates did not function properly (which have a clock pulse longer than the...

Let me know what I can do to help. I'm sure there are I2C slave example projects available for ARM MCU`s. Eg LPC824 it would be easy to create a...

Hi, I missed this somehow. Thanks for the message! I have tried different ways earlier to get an Arduino device to stretch, but I found that it was really unreliable...

Could it be a problem that I'm working on both MSSP devices of the FT2232H? I'm using two different I2C busses. Today I have connected a MCP2221A device to my...

I have seen this issue also on Win7 with v0.40.6. If I can test (and help to fix this) please let me know; as this also gave me some problems.