Chris

> The terms master/slave come from the Modbus protocol documentation. > > A few years ago, I considered replacing them by server/client, to avoid racist connotations and improve understanding. >...

Hello, is it possible to enable the trace mode of the node-red logging and see what happening in the logs ? More informations on the setting file: https://nodered.org/docs/user-guide/runtime/settings-file and about...

how huge is the file ? Could you put it as attachement (check before there is no credencial or confidential information inside)

As it I will say any error message. Plus if you can try to split your file from the first boot and each reload and see what are the differences.

Ok I will post the code I currently use when I have fully tested it (still need some test on negative temperatures)

Hello, Can you try the older version: https://github.com/arkane-systems/mousejiggler/releases/tag/1.8.42 Maybe it's a .NET problem ?

hello all, I too had a problem with this particular node on a different hardware. it took me a week to understand and see what was the problem. Yes a...

Could be interesting to have a repository of known plugin and what they do. I also haven't found anything but it is weird because there is a plugin system available...

@nagyrobi @kevin-david Hello, I have found the timing can be pretty hard to set it right. personally at 115200 bps i had to set the -t (--interval) at 1000 to...

> @Ekristoffe thanks for the info - were you sniffing a ventilator/ERV/etc. or a different device? I have used it to sniff a lot of different devices and protocols. As...