EissaAl

same issue

omg just fixed the issue by following this https://askubuntu.com/questions/476036/xset-unable-to-open-display then this https://raspberrypi.stackexchange.com/questions/752/how-do-i-prevent-the-screen-from-going-blank what i did to solve this problem i tried this command `xset s noblank` but it keeps saying...

I think your problem is with the screen orientation u have to check if it is flipped because I had the same problem and I found out that my screen...

[How_to_change_display_direction-GPIO-Resistive_Touch-V1.2.pdf](https://github.com/mcuadros/OctoPrint-TFT/files/2636766/How_to_change_display_direction-GPIO-Resistive_Touch-V1.2.pdf)

same issue with OctoPi on a 3B+, printer is a Prusa i3 MK2S.

omg just fixed the issue by following this https://askubuntu.com/questions/476036/xset-unable-to-open-display then this https://raspberrypi.stackexchange.com/questions/752/how-do-i-prevent-the-screen-from-going-blank what i did to solve this problem i tried this command `xset s noblank` but it keeps saying...

not only in the status panel, if you left it without connecting the printer it will freeze after some time. https://i.imgur.com/zjM0VJl.jpg

@ppamidimarri I mean even if u connect the printer it will stay in the splash screen because I didn't connect the printer for some time. same as the status panel...

@mrcg how I can modify the code? sudo nano then what is the location of the file