Ed Smallenburg
Ed Smallenburg
Please remove the adafruit vs1053 library.
VS1053.h should be in your working directory if you followed the procedure in chapter 15 of the document. Please show the contents of your working directory. You probably missed this...
You need at least one display driver in your working directory. Check chapter 15 again. Include and nextion should not be in your working directory. And where is your config.h?...
You need that file if you configured bluetft in configh. Show the config.h file, after you have edited it for your set-up.
You do not need the ino file. After uploading the sketch and the data directory, connect to the AP at 192.168.4.1 and use the config page of the webinterface to...
Connect your PC/tablet/phone to the ESP32Radio network and go with your browser to 192.168.4.1. Go to the config page and set your WiFi credentials. There should be some info in...
The .ino file is not needed. You may use it to prefill the NVS. The defaults.txt can be used to speed-up the configuration in the NVS by using the web...
Looks like a problem in the NEXTION part.
I have added the nextion files to the "nextion" directory.
It seems that .HMI files are not supported by github. I have added a .zip file in the nextion directory.