DystopiaNow

@jgromes Im using HSPI pins in a custom design. ESP32-S is the "common" ESP32 series (the ones that are used in Heltec boards) I tried initializing the module as you...

Library version is 5.0.2. Arduino IDE version 1.8.13 As I mentioned in the editing above, I could initialize the module using the SPI class as you described it, I just...

Will check that again, since I updated it using the Arduino IDE (moving to Platformio soon).

@jgromes A mistake of mine, I'm using the 5.3.0 version of Radiolib. This is the error code I've got when trying to compile initializing the module in the SSTV examples...

This is the output I've got from RX-SSTV using the AFSK SSTV example and ESP32, with the module configured as SX1278 (I'm using GPIO19 from ESP32 for AFSK) with Martin1:...

I tried the last fix and could generate the desired bars with Martin1 in AFSK (thanks a lot for that). I'm a bit confused with Non-AFSK...does it requiere any other...

This is the type of signal I'm getting with just FSK, tried in SSB with no luck, since these are just long and monotonous tones changing slowly, one "tone" at...

Im using RFM98, but the code wont compile if I try to use that class instead of SX1278, so I use SX1278. Compiling for "ESP32 Dev Module" with default settings,...

Tried again with 2-FSK example and RFM98 class, but still, I only get something like this, with two tones changing (tried hearing with USB/LSB but it doesn't look like SSTV)...

These are the values I got using Ciancone Marlin PID Autotunning: 0.021435, 0.000135, 1.843517 With Overshoot Autottuning: 0.025984, 0.000075, 6.027832. The calibration processs curve looks like this:  This is...