Jon Raymond
Jon Raymond
With the pending acceptance of [support for the nRF52805](https://github.com/sandeepmistry/arduino-nRF5/pull/442) chip it is my understanding that an alternative SoftDevice will need to be added to the core to fully support it....
This isn't an issue. @MCUdude, I would just like to express my thanks for all the work you put into MegaCore. Thank you for sharing your knowledge. It has been...
TL;DR - Only use INT3:0 to wake from Sleep(). After several nights of beating my head against the wall trying to get the Atmega128 to wake from sleep using INT6...
The most recent BLEbee hardware has the LED connected to P0.0 and pullups on P1.0/P1.1. The documentation for the compiled hex files seems to denote an older version that has...
Power Banks with QC3/4 or PD would potentially feed 9-20v into the Attiny if an appropriate device was connected and called for the increased voltage. Possible solution would be to...