Deztak
Deztak
The bottom row are actuals, second bottom row is the planned. I’m re-running the option and publish every few minutes, basically when there is new pricing or Solar forecasts. Most...
Mark helped me out via an Amber-Home Assistant Facebook group to get some rest sensors setup that pull data from Solar.Forecast as well as pushing data to EMHASS. Unfortunately I...
My rest commands: Copy-pasted from stuff Mark sent me on facebook as I tried to get his code from the help docs to work and struggled a lot. I don't...
EMHASS add-in config file: Note, I have no deferrable loads setup. Mark recommended that I try a shelly device to setup my hot water as a deferrable load. I'm still...
Note in today's plan @ 1700 I have 8,512 W in P_grid_neg and 3,813 W in P_load ... so the total power through the inverter per the plan is 12,325...
So looking at it from a power source perspective when my SolarEdge inverter is in "Discharge to maximise export" mode it outputs all available pv and batt power to the...
Yes, that makes the most sense for where my setup isn't as EMHASS assumes my setup is configured. @purcell-lab > I suspect your issue maybe that you have a DC...
> Couldn't this issue be solved by a maximum power from grid settings AND a maximum power to grid setting? I did try this but, my inverter CAN charge the...
On this topic, I also have another code that checks if I’m better of charging from the grid or just charging from Solar and having the house load come from...
I agree, I just don’t know what would be involved as I don’t know the code. From reading the API info for my inverter, it has heaps of different operating...