Javier Moreno

> i guess problem is there is no AUTO.LOITER mode in PX4. https://docs.px4.io/v1.12/en/getting_started/flight_modes.html POSITION mode can be useful. LOITER mode is the same as HOLD, its just a rename ...

Have you tried the multiple lamp feature? Also, I don't really like the feature of reseting the timer for each touch :( If you remove that feature and confirm that...

Sadly it won't be that easy. The whole logic is prepared for just 2 lamps. It can be done but you'll need to make changes into the code.

Thank you! In reality you could try just publishing manually the messages from the adafruit io page (for example a 34 or somthing different from 20s and 10s) there is...

Hi @alexrizk1117 That's the same issue I'm getting and its due to the adafruit's update I think :( I hope I can try to fix it soon

@alexrizk1117 Mine doesn't connect at all I also use ESP8266 too, there was a typo on the readme haha https://forums.adafruit.com/viewtopic.php?f=56&t=192516 in this post I understand that the update is the...

> sorry didn't mean to close the issue It's solved now! Pull the new changes and it should work

> An Update for everyone who stumpled over the same issue. > > What helped currently for one board was to switch from Arduino IDE 2.02 back to version 1.8x....

> Hi @DevJav, > > yep finally second one works as well. However I get a sporadic failure while trying to send a message. It shows one flash in red...

Hi! I understand what you're saying, but as you said, after 15 mins they will sync again when both have reached their timeouts. There's also one way to reset both...