DAR
DAR
When installing via `.\install-driver.sh` an error occurs: Running install-driver.sh version 20220705 5.19.0-kali2-amd64 x86_64 Starting installation... Copying source files to: /usr/src/rtl8814au-5.8.5.1 Copying 8814au.conf to: /etc/modprobe.d Creating symlink /var/lib/dkms/rtl8814au/5.8.5.1/source -> /usr/src/rtl8814au-5.8.5.1 Sign...
I have x86_64. Why it also shows ARCH=arm64, I don't know
Yes. Absolutely such
OK. Thank you. I will follow the updates.
ID 2357:0106 TP-Link Archer T9UH v1 [Realtek RTL8814AU]
Unfortunately, these errors remain.
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/5.19.0-kali2-amd64/build M=/home/kali/8814au modules make[1]: вход в каталог «/usr/src/linux-headers-5.19.0-kali2-amd64» ERROR: Kernel configuration is invalid. include/generated/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel...
Same way((((
Reinstalled Kali. Driver installed .\install-driver.sh. However, the adapter now does not see the network. Switched to monitor mode, but also did not see the network
phy#2 Interface wlan0 ifindex 5 wdev 0x200000001 addr 7c:c2:c6:32:aa:67 type managed txpower 20.00 dBm