Mick Percy

Just going to leave an idea here, whilst doing some work on the shield I had the idea that the frequency measurement should be moved out to hardware by using...

Further to the above discussion of a hardware based frequency converter I stumbled across the following whilst looking for MAF Data... https://www.thirdgen.org/forums/tpi/596907-cheap-frequency-voltage-converter.html  It's an old post but no reason...

haha, I noted earlier that there is already a TODO comment in the MAF code to remind me to do this It should ideally trigger a system message that is...

Possibilty to utilise PCNT Pulse counter... https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/pcnt.html#_CPPv416pcnt_unit_configPK13pcnt_config_t Or to hack UART to act as non-blocking pulse counter... https://forums.electricimp.com/t/best-way-to-count-pulses-why-is-pulse-counter-blocking/6279/5

Also related to #205 - Post Compile Configuration

BigDyno database - https://www.bigdynodatabase.com/DynoCF.php Would be good to replicate similar for flow bench

New demo now created an uploaded to - https://diyflowbench.com/demo/ This is inline with current version. Some features will not work as there is no board connected. Remainder of items are...

Is this PWM output?

PWM is pretty trivial to implement but it will require additions electronics as I suspect that the servomotor will exceed the capabilities of standard output current capacity (nominal 500mA). This...

Started to take a quick peek at this. First hurdle is always trying to find a good library. Adafruit is most common, but I will not use their libraries in...