DecayFi

Hi, is this topic still ongoing? I would be interested to continue this work. Is there anything that needs to be done for this to be completed? I started a...

Thanks for the reply. Would it harm the project to make the data partition name also selectable via kernel cmdline as the imgpart already is? Is there a problem I...

Thanks, this looks very interesting. I was intending to remove the sdcard completely or just leave bootcode.bin on it, so that I can chose the distro to run by plugging...

@earlchew : Were you planning to adopt the resize script to UUID as well? I am still facing the problem that even after all modifications in the initrd being done,...

Yes, I was referring to the initial resize. I know it can be done manually, I was just wondering whether this script can cause harm when the sdcard is used...

Hi, I think I get your point. If I understood this correctly, a solution that creates more flexibility but will default to the current behavior would be acceptable, even if...

I tried to study the the new init. If I read this correctly, this will still not allow to boot from usb as the new init will try to mount...

I tested the initscript on both native sdcard and for usb-boot. I was able to boot completely from USB-Stick at https://github.com/DecayFi/Build/commit/e4ca246707f0f82cb349dea20acba4bf5c00da8f The script will default to the same behavior as...

I tested the /boot mount as well, it does survive the switch_root. If there is an enrty in fstab also specifying boot, it seems to mount it twice if both...

Did another test run - took most recent stock image, wrote to usb stick. Placed modified volumio.initrd in /boot partition and changed kernel-cmdline to splash quiet plymouth.ignore-serial-consoles dwc_otg.lpm_enable=0 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1...