DeDaMrAzR

 First 4 or 5 tries I have the same code received after that some completely different codes. This can also be repeated with holding a button.

@soundfx42 Can you try now on the latest public build? Thanks

@openshwprojects I tried a solution on a fork of mine and it seems to work, semantic-release needs to be pushed to v21 along with several other plugins. I've sent you...

to initiate and read BME280 use the following in your autoexec file: ``` // startDriver BMP280 [ClkPin] [DatPin] [OptionalTargetChannel] startDriver BMP280 7 8 2 BMP280_Adr 0x76 ``` 

-1 is exactly that option, remember last state (or as you phrased it - do nothing) Can you open a thread in - https://www.elektroda.com/rtvforum/forum507.html And try to provide a bit...

Login to your device, and start webapp, go to config tab and you should have something like this and if possible share that, also either a screen shot of your...

Move button and Relay to channel 1, set -1 for channel 1 and report back. 

> That's another possibility, but I would also try to move button to another channel then the relay. It could also be that button is just configured to the wrong...

1 | VBAT Power supply pin (3.3 V), which is connected to the VBAT pin on the internal IC 2 | PWM2 -> P8 pin 3 | GND Power supply...

@jschwalbe Did you resolve your issue? Did any of the suggestions made any difference for your problem?