Danton73

> For my Terra I set the OCPP in TerraConfig: ws://myhomeassistantIP:9000 As far as I remember I set up the host address as the manual said: 0.0.0.0, without https The...

> > the voltage shown is multiplicate to 10 (I watch 2199 V).. do you know why? > > No, in my setup I always had correct values. > >...

> @maxcim32 Have you tried setting up your config in the TerraConfig portal instead of the app? Or does it work now? is there any special setting in terraconfig app?...

> @Danton73 At this point in time my ABB Terra is not connected to my car and it reports 229.7 V. Have you checked the raw communication data by [enabling...

@janrothkegel Thanks for the info. In these days I updated the firmware two time: first time at 1.7.0, second time at 1.8.0 but noting is change. Same problem. Do you...

I confirm, same problem. I also point out that despite numerous tests, I can no longer configure the map display, even though I follow the instructions to the letter of...

I did the same thing as @gaborbozoky months ago: completely uninstalled the Thomas5555 version, restarted HA before installing the official one, and it worked. I only regret that the Thomas5555...

Hello everyone, I have also noticed that the Smarther device no longer works when switching to cooling mode. This issue only occurs on Home Assistant (I'm using the Netatmo integration),...

Hello, I conducted some tests: by setting the Smarther to heating mode and restarting Home Assistant, everything works correctly. If it is set to cooling mode, the Lovelace dashboard does...

> Hi everyone. @cgtobi just updated me about the developments. He’s more or less done with the library and need to implement the HA part! 🙂 Hi, thanks for the...