Daniel Giesbrecht

Hard-coded paths in python scripts

1

I noticed that some scripts for updating footprints have hard-coded paths: @Misca1234, was this because only you were using them? ## Hard-coded paths: ``` FPDir = '../../../../kicad-footprints/Package_DFN_QFN.pretty' KISYS3DMOD = '../../../../kicad-packages3D'...

I noticed that the screenshot used for [S4.4](http://www.kicad-pcb.org/libraries/klc/S4.4/) of **LM741** does not match the KiCad library, and may mislead contributors on how to place `NC` pins. ### LM741 on website:...

Inaccurate 3D model - nRF52840 AQFN-73

1

nRF52840 AQFN-73 isn't a true QFN package, but rather, is an LGA-style package. The 3D model does not reflect this.   

Readme is missing `comparelibs.py`

1

I noticed that the readme.md is missing a description for `comparelibs.py`.

I noticed that the Travis symbol PR check didn't catch [S3.3](http://kicad-pcb.org/libraries/klc/S3.3/): >Symbol body must have a line width of 10mil (0.254mm) I noticed this during [this PR](https://github.com/KiCad/kicad-symbols/pull/1046).

Add SYN113/115

2

Add Synoxo SYN113/115 Datasheet: https://datasheet.lcsc.com/szlcsc/1910111742_Synoxo-F115_C105184.pdf  --- - [x] Provide a URL to a datasheet for the symbol(s) you are contributing - [x] An example screenshot image is very helpful...