Ian Veldman

Here is my mesh data: 18:09:29.845 : Measured points: 18:09:29.853 : 0 1 2 3 4 5 6 7 8 18:09:29.862 : 0 -0.31875 -0.33875 -0.36375 -0.38375 -0.42875 -0.47250 -0.49375...

Start by in the config.h file search for TFT.

See issue: It seems the problem lies with the newer version of ststm32 (5.5.0) see issue: platformio/platform-ststm32#267 And closed issue #120 I have been struggling to compile Marlin2.0 MKS Robin2...

CJSoong Did you get your Marlin 2.0 Robin2 FW to compile. I manged to get mine to compile, but there is something wrong. It seems as is the Fw upload...

Hi Robert. Thank you for the time spent on this. Dit you upload the code that compile? I'm interested. Even if I have a Robin2. Ian

CJSoong Please share the following files: platformio.ini Configuration.h Configuration_adv.h pins_MKS_ROBIN2.h and any other files you needed to change to get Robin2.bin to upload. If I can get my Robin2 to...

Thank you CJSoon I'll keep you posted Ian On Tue, 10 Sep 2019 at 16:36, cjsoong wrote: > @DaVincIan > https://drive.google.com/open?id=17-RYrc-iCv12Y3fG8ArDsCcz7IoZaJL3 > > — > You are receiving this because...

CJSoon Again thank you for sharing...I'm starting to think there is something different on my Robin2 board/TFT controller. Your code compiled successfully, but do not upload. I tried uploading the...

Robert From CJSoon posts, I understood that he was able to config, compile and successfully upload a Robin*2*.bin file that resulted in a working TFT screen (no SD card or...

Robert At this point in time I cannot get the FW upload to succeed. The screen shoes a green band, runs 0 %...100 %, then stops (I suppose it hangs)....