DWILSON357

Thanks for the reply, Once I realized I was getting 2 pins with voltage(from the ECU) I figured that was likely the issue and I should stop trying to use...

So today I removed R39. Went back out to the car and still no luck. I checked the composite log/highspeed log and see no readings on the crank sensor when...

I did not know about the Facebook group, that is great to know, I will join! I'm 99% sure its hall effect because its a M52(timing cover mounted) Crank sensor(all...

Hey Ali, The sensor tested bad, that 5V to the signal either blew it up or it was DOA. New sensor today will report tomorrow. I didn't wanna clog up...

Pasi Thanks for getting back to me. I think because I bought a cheap sensor it didn't have the tiny pinout. I took apart a M50 Cam sensor and saw...

Ok So I switched gears and hooked up the VR conditioner and went back to the VR sensor. And I am getting data in the Composite logger. However RPM is...

Thanks again Ali, I will give this a try tonight I might have enough spare connectors to make an adapting plug. That In-dash looks sweet BTW.

Today's Update, . I only had time to change to Rising, didn't get around to swapping wires It seemed to make no difference to me. 

So the follow up question then is how come the Speeduino isn't registering RPM/Firing the Plugs and Injectors?