Cyberhornet34
Cyberhornet34
Thanks for fast reply, I would love that would be so simple ! here my ? command: if i define :high, all switches are trigered ! :low is a good...
Sometimes i don't get Alarm at startup, i get IDLE but when i touch reset switch, even few minutes after startup, i get: [MSG:ERR: reset_pin is active at startup] [MSG:INFO:...
Hi Mitch, Yes i'm using internal pullups on control pins I'm using a R/C filter (low pass) with a 100R resistors and 100nf capacitors. here's my old config that worked...
I just tested to add 10K pullups instead of internal one, i get the same issue... By the way, when i put reset pin on the opto circuit (who as...
when i trigger reset switch, i get this: ``` Grbl 3.9 [FluidNC v3.9.8 (wifi) '$' for help] [MSG:ERR: reset_pin is active at startup] [MSG:INFO: ALARM: Control Pin Initially On] ALARM:11...
Thank you for everything you do, Bart and you.
Hi Bart, The startup issue i got cames from noise on R/C entries and FLuidNC who have not the same level of debounce than GRBL ESP32. (i'll redo a new...
Thank you Mitch :)
Hi Mitch ! I come to get news after 3 weeks. Did you take the time to take a look on the issue when reset button is pressed ? Thank...