Apicalis
Apicalis
Thanks for the quick response. I took several pictures of menu points that might be of interest. Btw. the Quad was active when I took the pictures so the Receiver...
Edit: when i Look closely it appears that Channels 11 and 12 in the remote Display are flickering for milliseconds to another value than 1000 even when they Quad is...
Says it on the first post bottom sentence. It's the x6b and I am using ibus
@qba667 There is only 1 Sensor listed and it says "Tx V1:5.44V" which I guess is my Remote Battery Voltage if I am not mistaken EDIT: I went to "Choose...
I never really bothered to look into telemetry since I read all the stuff I thought I needed from the OSD. I checked the RX Standard and it is AFHDS...
@qba667 @dolphin78 How can i establish the telemetry link? I thought this was always active anyways. I think I had a telemetry link with the old firmware in my first...
@qba667 Sorry for opening this issue. It's officially been solved, my receiver somehow didn't send telemetry. I now connected a Flit10 Receiver and everything is working perfectly fine! Thank you...