ClockwiseCounterclockwise

Everything you've mentioned I've tried with support and advice from deadbyte on my initial encounter to no avail. I did further investigation yesterday and have noticed something weird. The RMTX16s...

Hello, seems this issue came back. This time it happened after I updated to 3.0.0RC2. Difference this time is that the SD Card is OK, no corruption. Hardware: Namimno Flash...

I deleted all models (again) and recreated the models. The fan comes on again after recreating all models...not sure why this is happening. I'm going to reload EdgeTX 2.7.1 again...

@CapnBry My apologies, yes you're correct. I was referring to the [Fan Thresh]. Unfortunately the issue is still present.. I've since gone through quite a bit of testing. Both on...

@CapnBry - Further investigation results: I found that by enabling Wifi in the ELRS > Wifi connectivity menu the fan starts up. I switch to a model and if the...

@CapnBry - I just updated to 3.0.0 Final release. Unfortunately it is showing the same symptoms. No fan spin (for all models) until I go into the ELRS > Wifi...

Hello Paul, there's no warning. (on both Namimno TX modules I have)  Another setting [Fan enable pin] that Bryan asked to validate on Discord just now: 

Used this fork and everything is working fine again. Thank you for taking the time to fix this!