Chekhov Ma

“多实例”具体如何使用呢？我的应用刚好需要管理片内Flash和外部EEPROM，想了解一下。

> It does work already with the official io board. > Just add this to the config.txt > "dtoverlay=dwc2,dr_mode=host" @CopterGUI It seems CM4 doesn;t work for me either... Could you...

@MacDaddyFPV Thanks for your reply. I understand this is not top-priority job as v2.1 is about to come out. I can try my best to work on this feature, however...

Probably you could try high speed USB-UART dongles, such as FT232H based dongles.

Wow, Really looking forward to this. I already have a x86 SBC on my UAV running ROS. In order to use OpenHD, I added another Rpi3b. If I could intergrate...

Same issue. Ground Pi: Rpi4b + RTL8812AU card. I can confirm power is not the issue here. By the way, It seems Air Pi with similiar setup boot up fine....

@MacDaddyFPV GND: Pi 4GB v1.1, AIR: Pi CM4 Lite 2GB w/Wi-Fi, boot from TF card

x86_64固件使用5.10.117内核也有同样的问题，且路由功能正常，但CPU Load较高。 同样没有编译SFE功能。前面修改两个flow的设置也没有解决问题。