Expandable-6-Channel-ESP32-Energy-Meter

Expandable-6-Channel-ESP32-Energy-Meter copied to clipboard

Off topic - estimate time for new stock

7

Estimated time for boards to be back in stock?

ray-matos-mpf

3 Phase typo

2

Is this a typo on the 3phase description in the readme? CT3-CT4 on the main board with the 2nd phase CT3-CT4 on the add-on board with the 3rd phase.

bsaurusrex

3 phase transfo board

1

Hello we made a 3 phases channel transfo board. Can I submit the design in hardware repo to share to the community? Cheers Damien

hydro86

ATM90E32 not communicating ESP32C3

4

I'm getting a not communicating error, this has been setup with esphome. The device is a ESP32C3 these use the IDF framework instead of Arduino. Can anyone confirm this will...

jrmurdoch

6Ch crash on brownout

1

I have consistently having crashes when a brownout occurs. Sometimes the voltage drops to the point where some devices shutdown like TVs or fans with ir remote controls. LED lamps...

yn1v

Can I make a ESP8266 work with jumpers?

1

As I have a few ESP8266 modules laying around, can I make it work if using jumpers? Just unsure about the pins required to make it all work.

tmur11

Help setup 6Channel Board

18

Hi all, I've bought a 6Channel Board 1.4V rev1 to monitor my home. I'm living in Italy and here we have 220V Single Phase 50 Hz. I'm testing it for...

xefil

Instead of having a continuous stream and so that there aren't 5000 points of data per day can throttle average be added to the sensor? Another workaround would be to...

hanley-development

I have downloaded the repo and instelled Arduino IDE 1.8 with spiffs upload tool. Downloaded the libraries required and build the firmware. Upload the firmware and data folder to the...

yn1v