Cellivar
Cellivar
We have a US-24-POE switch that uses link aggregation for a couple of devices. It'd be very nice to be able to configure that setup as part of Terraform, however...
Apparently the elVeh value is coming in as a non-numeric value. I had to do some shenanigans to perform math on the value in my influxbd server.  Possibly...
### Is your feature request related to a problem? Please describe Currently Z2M uses local disk for storage, including device information and device state. I run my Home Assistant and...
Several of the recipes I need call for specific types of equipment that I have, but keep stored away as they aren't often used. Things like special attachments for a...
### Describe the feature or problem you’d like to solve Occasionally at my company we need to open large pull requests that modify lots of files. When this happens in...
**Is your feature request related to a problem? Please describe.** I learned about [the delightful website project](https://filamentcolors.xyz/library/) of a guy trying to standardize the color profile of printer filaments. His...
Thank you for building this app! I run it in a cluster environment which needs to be able to determine if it's up and running, and the usual pattern for...
EPL requires both setting the `O,,,,S` hardware option to 'reverse' the media sensor _and_ `Qp1,p2+p3` for black mark mode. If either one is set differently the printer will itself throw...
The `Q` command requires _all three_ parameters when setting black line mode. The EPL docs have some errors in how this calculation is described. It should be `Qp1,Bp2+p3` or `Qp1,Bp2-p3`...
The `~TAXXX` tear-off adjustment config is helpful for some fine-tuning. Add support for setting this via the printer config interfaces and via the library.