Carl Karsten
Carl Karsten
test: supply a known image on hdmi input0/1, compare that to a known image. image would be one of: 1. image file supplied at build time 2. image uploaded over...
The board should be able to test itself if an input is hooked to an output. hdmi cable from output0 to input0 ``` H2U 00:26:36>o0 on Enabling output0 H2U 00:26:42>i0...
input0: ... (disabled) video_mode 9 input0: ... (capturing) ``` H2U 07:19:59>status input0: 0x0 (@48.94 MHz) (disabled) input1: 0x0 (@74.25 MHz) (capturing) output0: [email protected] from input1 (underflows: 0) output1: [email protected] from...
the help doesn't show the full 'syntax' of the command, and the parser? doesn't respect the short form that other commands use. "foo port has no EDID capabilities" should be...
plugged in the exaton at 720p @50hz to input1 and got this every second for a min or two. H2U 04:09:24>dvisampler1: IDELAY busy timeout (%hx %hx %hx) been un/plugging it...
my box's post is 640x480. it would be nice if that was piped though to the display, even if the display is 1280x720. I dobn't care if it is scaled...
I haven't been able to reproduce this. ``` juser@cnt3:~/temp$ tio /dev/ttyVIZ0 [tio 22:36:02] tio v1.20 [tio 22:36:02] Press ctrl-t q to quit [tio 22:36:02] Connected C 0T3�"�q2��PA#J#�A�W�oS���oBCǼBrA�bBRRBB�B�BRRBEBBbR�T�2BJ3B�̣#����� H2U 00:01:47>version hardware version...
crelay on/off power cycles the Opsis. 38:49 to 39:00 is 11 seconds to connect - guessing that is the time it takes to boot. There is less than 1 second...
at nbpy17, chrisjrn's chrome cast (old usb stick looking version) shows input0: 1280x720 (@74.17 MHz) (capturing) but we get black feed
I am not suggesting anything, just posting these comments. from: http://logs.timvideos.us/%23timvideos/%23timvideos.2015-11-08.log.html#t2015-11-08T11:24:45 (10:49:55 AM) tumbleweed: CarlFK: no, it sees 640x480, even though the chromebook says it's sending 1024x768 (10:50:04 AM) tumbleweed:...