Caleb Jamison
Caleb Jamison
This is an implementation of AS923 (including subbands) and IN865 regions. For AS923_1, there is also AS923_1B. As I understand it, there is no difference on a device, only on...
While reviewing #81 and preparing a followup pr for IN865 and AS923 I found out that TTN uses a non-standard datarate for RX2 in the EU[1]. The TTN docs claim...
Fixes #29 I feel like there should be a way to handle this that doesn't leave the footgun of forgetting the sd_init function, but I'm not sure how to do...
Switch std imports to core or alloc where possible. Add std feature which defaults on. Modules map and orswot are gated behind std. Everything else works with no other changes....
This PR depends on/contains #3287. Direct mode reads are not supported (ie, reading the flash's jedec id or unique id). The 2350 doesn't have a boot2 like the 2040, but...
Many thanks to @thejpster for his work on the rom_data! Working around boot2 is currently a bit hacky for the rp235x, that will improve in upcoming rp235x flash pr. Is...
The primary purpose of this pr is to support the new rx fifo modes on the rp235x, it also includes the new JMP_PIN source for WAIT and PINDIRS destination for...
This allows for more precise control of rx. For example you can now start receiving, wait for the preamble irq, then if you rx the preamble, prevent another future from...