Briangsouza

#define Z_DUAL_ENDSTOPS ??

1

which pin z2? is the Xmax!? /***************************************************************************************** *********************************\* Z-axis dual driver *********************************** --- - * - A single Z stepper driver is usually used to drive 2 stepper motors. *...

error auto calibration in delta ( G30 A)

4

the movement between the probe this very concave up, something is strange

It is possible to make a manual bal small adjustments at the time of printing, such as babystep Z to Delta would have as a reference the towers and Cartesian...

arduino does not recognize dfu mode

1

does anyone know how to solve? Arduino: 1.8.12 (Mac OS X), Placa:"3D printer boards, RUMBA32, STM32CubeProgrammer (DFU), Enabled (generic 'Serial'), CDC (no generic 'Serial'), Low/Full Speed, Smallest (-Os default), Newlib...

NEW THERMISTOR SMD

1

https://br.mouser.com/ProductDetail/871-B57621C104J62 Termistores NTC 100Kohms Prusa MK2 MK2a

LCD MKS TFT32 V3.0.2 WORKS IN FW 4.3.5 BUT FW 4.3.6 NOT

1

the commands to warm the hotend, bed and move, works. but the sd card I can not print in fw 4.3.6 only in fw 4.3.5 everything works normal