Brett Hallen

I'm quite enjoying using this machine - thanks. I currently have the v1.3 PCB and have all Western parts apart from CPU and character ROM (both Soviet). I've found excellent...

Hi, My machine is configured as PAL with Y1 = 17.73MHz and JP1/2/3 = PAL. However the JP3 = PAL setting causes keys to auto-repeat with BASIC v1.03 and v1.04...

KiCad: Freerouting 2.1.0 is broken, can't auto-route same PCB as 2.0.1, need to revert

2

**Problem** I used Freerouting 2.0.1 to auto-route a PCB successfully. I then noted that 2.1.0 was available so installed that and re-tried. The same PCB can no longer be successfully...