Bovril1a

Ran with --debug pi@Pi3_misc:~/lorapipe/target/release $ sudo socat EXEC:'pppd nodetach file /etc/ppp/peers/lora,pty,rawer' \ > EXEC:'./lorapipe --debug --txslot 2000 --initfile=init-fast.txt --maxpacketsize 100 --txwait 120 /dev/ttyUSB0 pipe,pty,rawer' 14:04:54 [ INFO] lora starting 14:04:54...

Just did that very thing..... 8-) Also changed the radio pwr state to 15 which is the max for this chip set...... Seems to fire up OK although when it's...

Well, adding the band set works but still not sign of TCP/IP traffic. Strangely enough if I run a network command such as ping or traceroute, whilst the commands bomb...

It's ALIVE...... 8-) Just fired up ping and pong, screenshot of the activity and the outputs including RF quality below. Command line used ./lorapipe --debug --readqual /dev/ttyUSB0 pong > pi3_lora.txt...