Markus
Markus
I can also confirm this Error. I have 2 devices with the same effect (Yi Home 1080p 9FUS). Both devices do not send a start message, only stop and motion_files....
After a restart (without power) it seems that no more MQTT messages are sent. Now I grabbed one of the two cameras to "play": ``` 1. unhack 2. reset (button...
> But I don't know how to help you. Hmpf that's too bad. Based on the logs, do you have any other ideas where you could have a look? >...
> But probably we will not see detected motions. Unfortunately, you're right. root@Stellplatz:\~# killall mqttv4 root@Stellplatz \~# LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/yi-hack/lib root@Stellplatz:\~# /home/yi-hack/bin/mqttv4 ``` Starting mqttv4 v0.0.3 Trying to connect... Client testcam sending...
I used Ubuntu 22.04 in my proxmox container as well as in my VM. That was the error. Ubuntu 22.04 probably uses a buggy libmicrohttpd-0.9.75 which causes exactly this problem....
Thank you for clarifying the unanswered questions. In the meantime I'm playing around with Frigate. Motioneye is good but still brings me too many false-positives. ~~One~~ two last questions: What...
which gcode do you use to set the heatup-temperature? For Hotend: [M104](https://marlinfw.org/docs/gcode/M104.html) [M109](https://marlinfw.org/docs/gcode/M109.html) Bed: [M140](https://marlinfw.org/docs/gcode/M140.html) [M190](https://marlinfw.org/docs/gcode/M190.html) If you use M109/M190, which is usual to really have the desired temperature at...
IMHO this is not possible because the filament sensor runs directly over the TFT.
Das kann ich so nicht bestätigen - ist bei mir definitiv nicht der Fall. Das sieht mir auch nach viel zu viel Flow aus. Bist du sicher, dass du hier...
Die 0.013 wurden ohne großes Überlegen einfach übernommen, weil es in allen anderen SWX1-Firmwares, die wir so finden konnten, schlicht und einfach auch so war und wir keine Probleme damit...