BillDH2k

I guess I am confused with the "Estimated time to finish" reported at end of each epoch run. For both of my 1x GPU and 2x GPUs cases, the estimated...

I did a quick test, with different batch_bins values. All have accum_grad=1. Still very confused with the results: "batch_bins" "train_time " "Estimated time to finish" 1x GPU Test 1: 5,000,000...

Here is a sample of GPU activity during 1X GPU and 2X GPU training (over 30, 60 sec spans, based on output readings from nvidia-smi):  

If "DVMT Pre-Allocate" is already set to 64MB, remove the VRAM size patching: delete the following two keys from iGPU Device Properties: "framebuffer-stolenmem", "framebuffer-fbmem". When 64MB is taking effect, 4K...

Latest WhateverGreen.kext fixed this issue. Also need to add "-igfxblt" to the boot arg.

It would be great if at least a working example plist is provided.

Follow up - I did the following: starting from a dump v3.96 bios from my board, then replaced the ME and Boot Block with codes from the official v.3.96 BIOS...

I used HxD to replace the two specified blocks. I did not solve "ME is in manufacturing mode" msg issue during booting, but the system works just fine. BTW, I...

No. It does not effect boot process. Just a message displayed on the screen.

@bibikalka1 Great find! I will give it a trial using your method. Since my machine is already in ME 8, brute force flashed with a SPI programmer (thus not properly...