Jörgen van den Berg

Dear David, An ESP32 Guru in panic .... that is not what one wants to experience! Are the Jetblack Volt Trainer engineers not the same ones behind the Zwift Hub?...

Good morning David, It is always nice to take the panic away! I will modify all the programs accordingly a.s.a.p. and upload new versions! Check the repository and continue your...

Hello David, Lets have a look first at the Client software .... After connection it sends the first 5 minutes of the Volcano Circuit ride to the trainer and repeats...

Hi again, The output produced when you were running the Bridge code tells me that everything was fine and the Bridge software was waiting (in the end) for the trainer...

Hi David, The above output is showing the ESP32 is in control and functioning flawlessly, no (fatal) errors, just one out of synch situation, handled correctly... and afterwards the response.....

Hi David, Installed myWhoosh on a windows 10 laptop to have more reference and started testing with my tools.... ESP32 server tested with the relevant output as follows: 11:18:35.896 ->...

Continued.. Tested myWhoosh with the ESP32 Bridge tool: skipped the opening 09:20:40.001 -> Central Updated CCCD --> Notify Enabled for Char: [0x2ada] 09:20:40.048 -> -> Client Rec'd Raw FTM Indoor...

Good morning, The above behavior took quite some time before I understood what is happening... Please realize that the code in different versions is running for years with minimal corrections...

Thanks! After your ambiguous experience with the Client code it was clear to me that the Volcano Circuit data were not distinctive enough. Simply not enough road gradient to experience...

Good morning David, Nice to hear that you build your Simcline with used parts! About your setup moving in the "wrong" direction, can't you swap/interchange the 2 wires from your...